core-flow
Control-flow primitives for test sequences: loops, conditional branches, parallel execution and timed waits.
Catalog · 12 active
The TestHive component catalog
Every capability is a drop-in component. Built-in pieces ship with the app; everything else arrives as live updates from a curated repository — atomic apply, automatic rollback on failure, no restart.
12 active today
7 in roadmap
TestHive HW
HardwareThe native modular measurement hardware. Discovered on the network and controlled over standard SCPI. Mix the modules below on a single backplane.
Built-in
Always available, compiled into the app — the control-flow primitives and the capability dispatcher every driver builds on.
builtins
Pass/fail checks, generic measurements, variable assignments and structured logging — the day-one toolkit of any test.
instruments-core
Capability dispatcher that gives every PSU, DMM and calibrator a uniform set of semantic blocks (Set / Measure / Configure / Init / Get Infos / Reset).
Active drop-in components
Shipped as separate packages, loaded at startup and updatable from the app. Every component below is available today.
Bus
can-raw
Raw CAN frames over PCAN USB adapters with DBC-driven decoding for automotive and industrial DUTs.
Buscanopen
CANopen SDO/NMT primitives layered on top of can-raw — read/write object dictionary entries and send NMT commands.
Busserial
RS232/RS485 transport with framing helpers and reusable command templates for legacy instruments and embedded targets.
Fixturetestfixture
GPIO and measurement-multiplexer support for custom test rigs — relay matrices, probe-cards, in-circuit checks.
Inspectionimages
Golden-image library with a points-of-interest editor and PDF reference assets surfaced inside the operator runner.
Bench instrumentskeithley-2110
Keithley 2110 5½-digit bench DMM. Wires up to the instruments-core dispatcher, so every Measure / Configure block works out of the box.
Bench instrumentskeithley-2280s
Keithley 2280S programmable PSU — voltage / current control with the standard PSU semantic surface (Set / Measure / Configure / Init / Reset).
Bench instrumentstti-cpx400dp
TTi CPX400DP dual programmable PSU — per-channel voltage / current control, tracking mode and the standard PSU semantic surface.
On the roadmap
Components in active development. Activation toggles arrive in the app as soon as each ships.
Vision
Camera-based autonomous visual checks — component-mounting verification, LED blink detection, display content checks (OpenCV).
Sound
Audible feedback for operator stations — pass/fail tones, end-of-test melodies, configurable per-outcome hooks.
TTS
Text-to-speech with variable interpolation — drives spoken assembly instructions, warnings and contextual messages.
Tektronix DMM40x0
Bench DMM family (DMM4020 / DMM4040 / DMM4050) over LAN, USBTMC and GPIB.
Hioki SS7012
Source/measure calibrator with AC/DC programmable output — used as the reference during DUT calibration sequences.
Modbus
Modbus TCP and RTU client for PLCs, sensors and industrial devices.
GPIB · OPC-UA · TCP/UDP · HTTP
A pipeline of generic transport components for instruments and external services. Each follows the same component interface and can be added independently.
core-flow
Control-flow primitives for test sequences: loops, conditional branches, parallel execution and timed waits.
builtins
Pass/fail checks, generic measurements, variable assignments and structured logging — the day-one toolkit of any test.
instruments-core
Capability dispatcher that gives every PSU, DMM and calibrator a uniform set of semantic blocks (Set / Measure / Configure / Init / Get Infos / Reset).
Hardware
TestHive HW
The native modular measurement hardware. Discovered on the network and controlled over standard SCPI. Mix the modules below on a single backplane.
Buscan-raw
Raw CAN frames over PCAN USB adapters with DBC-driven decoding for automotive and industrial DUTs.
Buscanopen
CANopen SDO/NMT primitives layered on top of can-raw — read/write object dictionary entries and send NMT commands.
Busserial
RS232/RS485 transport with framing helpers and reusable command templates for legacy instruments and embedded targets.
Fixturetestfixture
GPIO and measurement-multiplexer support for custom test rigs — relay matrices, probe-cards, in-circuit checks.
Inspectionimages
Golden-image library with a points-of-interest editor and PDF reference assets surfaced inside the operator runner.
Bench instrumentskeithley-2110
Keithley 2110 5½-digit bench DMM. Wires up to the instruments-core dispatcher, so every Measure / Configure block works out of the box.
Bench instrumentskeithley-2280s
Keithley 2280S programmable PSU — voltage / current control with the standard PSU semantic surface (Set / Measure / Configure / Init / Reset).
Bench instrumentstti-cpx400dp
TTi CPX400DP dual programmable PSU — per-channel voltage / current control, tracking mode and the standard PSU semantic surface.
Vision
Camera-based autonomous visual checks — component-mounting verification, LED blink detection, display content checks (OpenCV).
Sound
Audible feedback for operator stations — pass/fail tones, end-of-test melodies, configurable per-outcome hooks.
TTS
Text-to-speech with variable interpolation — drives spoken assembly instructions, warnings and contextual messages.
Tektronix DMM40x0
Bench DMM family (DMM4020 / DMM4040 / DMM4050) over LAN, USBTMC and GPIB.
Hioki SS7012
Source/measure calibrator with AC/DC programmable output — used as the reference during DUT calibration sequences.
Modbus
Modbus TCP and RTU client for PLCs, sensors and industrial devices.
GPIB · OPC-UA · TCP/UDP · HTTP
A pipeline of generic transport components for instruments and external services. Each follows the same component interface and can be added independently.
Live updates
How component updates work
Drop-in components live in a separate repository. The app polls a curated channel through the GitHub Contents API and surfaces an Update banner in System → Components whenever a new version is available. Applying an update is atomic — broken components roll back to the previous version automatically — and never requires restarting the app.
Get early access
TestHive ships in 2026. Join the early-access list for a seat, product updates and launch pricing before public release.